Woody Leonhard's no-bull news, tips and help for Windows, Office and more… Please disable your ad blocker – our (polite!) ads help keep AskWoody going!
Home icon Home icon Home icon Email icon RSS icon
  • Windows 10 / OOSU10 and Telemetry Settings

    Home Forums AskWoody support Windows Windows 10 Questions: Win10 Windows 10 / OOSU10 and Telemetry Settings

    This topic contains 1 reply, has 2 voices, and was last updated by  bjm 6 months ago.

    • Author
      Posts
    • #184810 Reply

      dph853
      AskWoody Lounger

      Win Ver:  10.0.15063 Build 15063
      OOSU10: 1.6.1395

      Too bad OOSU10 doesn’t notify you in real time that Windows security settings have been changed, but it doesn’t so you have to load the program every now and then and check to make sure that all of your settings remain as you wish them to be.

      I wasn’t very good at checking so I have no idea how long this issue has been occurring. Recently, I noticed that in OOSU10 under the SECURITY heading, the settings for Telemetry #1 & Telemetry #3 were being reset at regular intervals even though I continually disabled them again. Obviously Windows doesn’t like these settings to be disabled and set about overriding my choices.

      Has anyone else noticed this behavior? One or both of the settings were usually reset shortly after a reboot which is a pain as a reboot is required to disable these settings (a dog chasing it’s own tail scenario). I believe I have prevented the SYSTEM from making changes on its own. I won’t detail what I did at this point, I’m just curious if others have noticed telemetry settings (in my case) or other security choices being reset or overridden by Windows whenever it feels like doing so?

      After a bit of monitoring, I figured out that it was services.exe that was rewriting the registry values for these two telemetry settings.

      • This topic was modified 6 months, 1 week ago by  dph853.
      • This topic was modified 6 months, 1 week ago by  dph853.
      • This topic was modified 6 months, 1 week ago by  Kirsty.
      • This topic was modified 6 months, 1 week ago by  Kirsty.
    • #185004 Reply

      bjm
      AskWoody Lounger

      I’ve not observed Telemetry #1 & Telemetry #3 being reset at regular intervals.
      Perhaps:
      1) confirm that OOSU10.ini is in the same location as OOSU10.exe
      2) Create a system restoration point.
      3) Undo all settings (“factory settings”) + machine restart.
      4) Apply your preference settings + machine restart.
      5) Test

      Yes, I’ll check OOSU10 to Accept changes or Revert changes … e.g.,
      2676
      W10 Home 1703 (15063,994)
      OOSU10: 1.6.1395

      Attachments:
      You must be logged in to view attached files.

    Please follow the -Lounge Rules- no personal attacks, no swearing, and politics/religion are relegated to the Rants forum.

    Reply To: Windows 10 / OOSU10 and Telemetry Settings

    You can use BBCodes to format your content.
    Your account can't use Advanced BBCodes, they will be stripped before saving.

    Your information:


    Comments are closed.